As of M.Y. 1997
Air Conditioning (A/C)
Models 129 as of MY 1997
Reading and Programming Version Code [14]
Reading Version Code
1. Turn ignition ON.
2. Press REST > 6 secs, press FAN+ to set display to 42.
3. The the version code will appear in the display window.
If the version code is not correct for the vehicle, the version code must be reprogrammed (see table).
4. To end press REST.
Programming Version Code
1. Ignition: OFF
2. Press REST and hold depressed.
3. Ignition: ON
4. Release REST.
- LED REST flashes at one cycle per minute.
- Display shows 00p.
- All other LED's are "OFF".
- The function of the A/C pushbutton control module is as in position 0.
5. Set version code by pressing "Recirculating Air" (see table). The first activation of "Recirculating Air" must occur within 30 seconds after ignition "ON" (thereafter, the programming mode is blocked).
6. Enter version code by pressing EC. A previously stored version code is thereby erased.
7. Turn ignition: OFF to end version code programming.