Limit Switch, Top Up (Differential Operation)

Removal
Top
move to position A with top switch or manual actuation

Plug connector (S84/4x)
disconnect

Phillips screw (1)
screw out

Limit switch (S84/4)
remove together with cable

Installation
Install in opposite order






Special tool

Adjustment
Move top to position B with top switch or manual actuation until screw (3) can be adjusted with special tool (2).
The top should switch over to differential operation (top moves more slowly), when the top frame has passed the highest point (approx. 500mm in front of front locks).
Turn screw (3) to right:
Top switches over to differential operation later
Turn screw (3) to left:
Top switches over to differential operation earlier