Rear Axle Suspension Rubber Mount

Rear Axle Suspension Rubber Mount






NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.

REMOVAL
Using removal/installer tool No. 202 589 03 43 00 with (01a and 01c shown in the illustration), or equivalents, press rubber mount (01b) out of rear axle carrier

INSTALLATION





Coat rubber mount (1b) with with a suitable naphthalene H lubricant

Using removal/installer tool with (01c, 01f and 01g shown in the illustration), pull in rubber mount (01b)

Install lower section of installation tool (019) on the rubber mount (1b) so that the lugs are not damaged during installation