AP00.20-P-0000-13TN Read Out Workshop Code

AP00.20-P-0000-13TN Read Out Workshop Code
- MODEL 211 as of 1.9.03

1 Turn key in EIS [EZS] control unit into position 1.
2 Press system select button (S110s3) repeatedly until (A1p13) the basic display (kilometer reading or temperature display) or the speed display is shown in the multifunction display.
3 Briefly press trip odometer reset button (A1s3) 3 times.
An acoustic signal can be heard and the voltage is shown in the multifunction display (A1p13).







4 Press lower scroll forward/back button (S110s1)
The "Service" menu appears in the multifunction display (A1p13). The "Service Data" menu item is highlighted.







5 Press lower system selection button (S110s3) to confirm.
The service data are displayed. The highlighting marks the multi-digit workshop code (4).
6 Note workshop code (4).
The workshop code (4) is needed for dynamic maintenance (ASSYST PLUS) in the WIS.
7 Press the upper system selection button (S110s3) repeatedly until (A1p13) the basic display (kilometer reading or temperature display) or the speed display is shown in the multifunction display.
8 Turn key in EIS [EZS] control unit into position 0.