Alignment
Description and Operation
Service and Repair- AR40.00-P-0202A General Information on Vehicle Level Measurement
- AR40.20-P-0200A Perform Chassis Alignment Check
- AR40.20-P-0230A Attach Mercedes-Benz Rapid-Clamping Devices
- AR40.20-P-0300A Check and Adjust Vehicle Level at Front & Rear Axles
- AR40.20-P-0301A Check Front & Rear Axle With Inclination Instrument and Adjust
- AR40.20-P-0320A Check Ball Point Position
- AR40.20-P-0321B Adjusting Ball Point Position
- AR40.20-P-0322C Check and Adjust Camber and Caster at Front Axle
- AR40.20-P-0323C Check and Adjust Toe on Front Axle
- AR40.20-P-0325A Check Toe-Out on Turns
- AR40.20-P-0331A Checking Rear Axle Camber
- AR40.20-P-0332A Check and Adjust Toe on Rear Axle
- AR40.30-P-0401B Preparations For Distance and Comparison Measurements
- AR40.30-P-0402A Performing Dimensional/Comparative Measurements
- AR40.30-P-0420A Checking Alignment of Spring Control Arm, Camber Strut, Strut Rod, Thrust Arm and Tie Rod on Rear Axle
- AR40.30-P-0425A Measuring Wheel Carrier (When Removed)
- AR40.30-P-0451C Measuring Steering Knuckle (Removed)
Specifications- Alignment Specs
- BE33.20-P-1000-01A Test Specifications For Wheel Location, Wheel Hub
- BE40.20-P-1000-07A Front Axle Toe
- BE40.20-P-1000-08A Toe-Out on Turns
- BE40.20-P-1000-10A Rear Axle Toe-In
- BE40.30-P-1000-05B Test Values For Distance and Comparison Measurements on Rear Axle
- Chassis Measurement Following an Accident
- Test Values For Distance/Comparison Measurement on Front Axle
- Test Values For Distance/Comparison Measurement on Rear Axle
Technical Service Bulletins
Tools and Equipment