AR40.20-P-0323C Check and Adjust Toe on Front Axle

Checking And Adjusting Toe-in Of Front Wheels
















1 Fix steering wheel in center position
2 Check center position of steering gear and steering wheel
- The steering gear is in the center position when the separating joint of the steering coupling and the marking notch on the steering gear (arrows) are above each other. Offset the steering wheel by a maximum of one tooth, if necessary.
3 Install, remove wheel spreader (030) on the inside of the wheel in the forward direction of travel

NOTE: The flexible mount of the wishbones results in a correspondingly large toe-in value which reduces to the correct dimension in the ready-to-drive condition.

4 Adjust toe-in by rotating the tie rods (10)

NOTE: After adjusting toe-in, check rubber boot on inner joint for twisting