Test Values of Crankshaft Bearing Cap Bolt

Dimensional Specifications
Bolt Length:
Thread Diameter 11 mm
Length When New 62.8 mm
Maximum Length 63.8 mm
Crankshaft Bearing Journal Diameter
Standard Size 57.950 - 57.965 mm
1st Repair Size 57.700 - 57.715 mm
2nd Repair Size 57.450 - 57.465 mm
3rd Repair Size 57.200 - 57.215 mm
4th Repair Size 56.950 - 56.965 mm

Tightening Specifications

NOTE: Tighten from the inside to the outside in two steps, beginning at the center.

1st step, tighten to 55 Nm
2nd step, Turn An Additional 90 - 100°