GF82.70-P-0007FA Mobile Phone System, Function

GF82.70-P-0007FA Mobile Phone System, Function

MODEL 203.7
- with CODE (386) Mobile phone
MODEL 203.7 as of model year 09/Modification Year 08 model refinement package

Depending on the equipment installed one of the following control units will be installed, hereafter referred to as the "audio unit":
- Radio (A2), with code (523) MB Audio 20 radio
- Radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio
- COMAND operating, display and controller unit (A40/3), with code (527) COMAND APS with single DVD drive (with navigation)

Function requirements
- Status "Circuit 30 ON" or "Circuit 15R ON"
- One mobile phone network is available in sufficient strength and quality
- Mobile phone system operating error-free
- Compatible mobile phone inserted into UPCI cell phone holder (Universal Portable Cell Phone Interface) (A34/15)
- Enabled Subscriber Identification Module (SIM) card inserted in mobile phone

The mobile phone system enables the mobile phone to make calls using the handsfree system only.

The mobile phone system makes it possible to operate various mobile phones optionally in the vehicle. Only the particular cell phone cradle has to be replaced to do this.

The cradle is connected to the UPCI (Universal Portable Cell Phone Interface) control unit (N123/1). The UPCI control unit forms the interface to the Media Oriented Transport System (MOST).

The mobile phone system consists of the following subfunctions, which are described in separate documents:
- Switching on and off characteristics
- Establishing call and terminating call
- Accepting call and rejecting call
- Short Message Service (SMS)
- Voice control, with code (813) Voice control system (VCS [SBS])