GF68.50-P-2001PC Convenience Closing Function

GF68.50-P-2001PC Convenience Closing Function

- with CODE (413) Panoramic sliding roof
- up to Model Year 8

Networking of components







A8/1 Transmitter key
A26/1 Left front IR receiver unit
A26/2 Right front IR receiver unit
M24 Sun blind drive unit
M24m1 Sun blind motor
N69/1 Front left door control module
N69/2 Front right door control module
N70 Overhead control panel control module
N73 EIS [EZS] control module

Function requirements
- No overvoltage/undervoltage
- All doors closed (state: locked) and
- Ignition key in "0" position or removed
- "Lock" button on transmitter key (A8/1) pressed and held
- Panoramic sliding roof closed

Function
The transmitter key (A8/1) sends an infrared signal to the left front IR receiver (A26/1) or the right front IR receiver (A26/2). The overhead control panel control module (N70) receives the request for convenience closing via CAN and actuates the sun blind motor (M24m1) in the "close sun blind" direction.

The motor remains actuated for as long as the "Lock" button on the transmitter key (A8/1) is pressed.

The convenience closing function for the sun blind is aborted if
- The request is no longer received via CAN, or
- The function requirements listed above are no longer satisfied.
The convenience closing function also closes the windows.