GF91.29-P-2012PP Storing Memory Positions, Function

GF91.29-P-2012PP Storing Memory Positions, Function

- with CODE (275) Electrically adjustable driver seat, steering column and outside mirrors with memory
- with CODE (242) Electrically adjustable front passenger seat with memory
- up to Model Year 8

Shown on vehicles as from 1.7.02







1 Circuit status
2 Door contact status
3 Memory request
4 Position storage
M27m1 Fore/aft motor
M27m2 Rear up/down motor
M27m3 Front up/down motor
M27m4 Head restraint up/down motor
M27m5 Backrest motor
M28m1 Fore/aft motor (for code (242b) front passenger seat electrically adjustable with memory)
M28m2 Motor backward, raise and lower (for code (242b) front passenger seat electrically adjustable with memory)
M28m3 Motor forward, raise and lower (for code (242b) front passenger seat electrically adjustable with memory)
M28m4 Motor for head restraint, raise and lower (for code (242b) front passenger seat electrically adjustable with memory)
M28m5 Backrest motor (for code (242b) front passenger seat electrically adjustable with memory)
N10/2 Rear SAM control unit with fuse and relay module
N32/1 Driver front seat adjustment control unit with memory
N32/2 Passenger-side front seat adjustment control unit with memory (for code (242b) front passenger seat electrically adjustable with memory)
N69/1 Left front door control unit
N69/2 Right front door control unit
N73 DI control unit
S17/3 Left front door contact switch
S17/4 Right front door contact switch
S91/2 Left front door ESA switch group (with memory)
S91/2s9 Memory store button switch
S91/2s14 Memory location 1, 2, 3 switch
S92/2 Seat adjustment switch group for right front door (memory) (for code (242b) front passenger seat electrically adjustable with memory)
S92/2s9 Memory switch (for code (242b) front passenger seat electrically adjustable with memory)
S92/2s14 Memory switch 1, 2, 3 (for code (242b) front passenger seat electrically adjustable with memory)
CAN-B Controller area network bus class B (interior compartment) (CAN B)

Function requirements
- Circuit 15 ON or
- Circuit 15 ON or
- Particular door open.

Function
Seat positions can be stored manually in the following two ways:
- Press and hold the memory switch (S91/2s9 or S92/2s9) and then briefly press the respective memory switch 1, 2, 3 (S91/2s14 or S92/2s14).
- Briefly press the memory switch (S91/2s9 or S92/2s9) and release. Within 3 s the corresponding memory switch 1, 2, 3 (S91/2s14 or S92/2s14) should also be pressed.

The driver-side front seat adjustment control unit with memory (N32/1) stores the current position of the seat motors (M27m1, M27m2, M27m3, M27m4 and M27m5). At the same time, the current positions of the steering column and the outside mirrors are also stored.

The front passenger front seat adjustment control unit with memory (N32/2) stores the current position of the seat motors (M28m1,M28m2, M28m3, M28m4 and M28m5).

For the driver side, three positions can be manually stored for each transmitter key. In addition, when circuit 15 is switched off, the current position (last position while driving) is also stored.
For the front passenger side, three positions can be manually stored.