Procedures

AN82.35-P-0001-01P Retrofitting Heated Windshield Washer Hoses











7 Hose bracket
9 Frame crossmember
10 Hose for heated windshield washer

1 Clip bracket (7) to frame cross member (9)
Four hose brackets (7).

2 Fasten hose for heated windshield washer (10) to frame cross member (9).
Insert hose (10) into hose bracket (7) and close clip on hose bracket (7).

3 Connect hose for heated windshield washer (10) to heater for windshield washer with hose clamp
4 Connect hose for heated windshield washer (10) to coolant circulation pump (M13) with hose clamp.






5 Remove adapter (4a) from firewall.
Part eliminated.

4a Adapter






5 Gasket
6 Line (5) for heated windshield washer

6 Remove seal (5)
Part eliminated.

7 Route line for heated windshield washer (6) through opening on longitudinal member to adapter (4).
Do not bend or kink line (6).

8 Install seal (5).
New part.






9 Connect line for heated windshield washer (6) to adapter (4) with hose clamp.
Adapter (4), new part.

10 Install adapter (4) on firewall.

4 Adapter
6 Line for heated windshield washer






11 Fasten line for heated windshield washer (6) to longitudinal member with mount (6a).
New part except code (580a) Automatic air conditioning, code (581b) Convenience automatic air conditioning.

12 Connect line for heated windshield washer (6) to heater for heated windshield washer with hose clamp.

6 Line for heated windshield washer
6a Bracket