AZ82.61-P-0012-01P Retrofit Wiring Harness For Portable Navigation Unit

AZ82.61-P-0012-01P Retrofit Wiring Harness For Portable Navigation Unit
- MODEL 203.### 1#
- with CODE (523) MB Audio 20 radio
- with CODE (535) Audio 20 CD radio, USA
not in conjunction with iPod




























The adapter wiring harness (1) must be routed and fixed in place in such a way as to prevent vibration and damage.
The connection (x) to the multi-terminal block (5) must be in a location that allows the ashtray to be removed and installed at any time without problems.
Insulate live multi-terminal block (5).

1 Insert connector (2) of adapter wiring harness (1) into slot in radio module connector (3).
Ensure that the connector (2) engages properly.

2 Connect adapter wiring harness (1) to wiring harness (4) of cigarette lighter.
Use multi-terminal block (5) to make connection. Connect black line of adapter wiring harness (1) to yellow/black line of cigarette lighter wiring harness (4) and brown line of adapter wiring harness (1) to brown line of cigarette lighter wiring harness (4).

3 Route adapter wiring harness (1) with connector (6) in rear area of installation opening from overhead operating unit in direction of center air outlet.

Connect TMC receiver
If present.






4 Disconnect antenna plug (7) from radio (A2).
5 Connect antenna plug to TMC receiver (9) "IN".
6 Connect provided antenna cable (8) to TMC receiver (9) "OUT" and radio (A2).
7 Connect TMC receiver (9) to wiring harness (1).
8 Store TMC receiver (9) in rear area of radio installation opening.