GF82.70-P-3001PM Telephone Book, Function

GF82.70-P-3001PM Telephone Book, Function

MODEL 203.0 /2 /7 as of 24.4.04
- with CODE (813) Voice control system (VCS [SBS])
- up to Model Year 8

Read address book
Following the command "Read telephone book" the voice control system (VCS) reads out the names that are stored in the address book. If, while reading out a name, the VCS switch (S93/2) is moved in driver direction, then this name is selected and a question is asked regarding whether the private, business or the CTEL number should be dialed.

Actions in the address book
The address book can be used in a similar way as the telephone book. It is possible to have the address book read aloud and open or delete individual entries, dependent on the voice command by using the VCS switch (S93/2) and pulling it towards the driver. If a voice tag has been assigned to an entry, then this entry can be selected via voice command.

For this purpose the voice recognition system is operated in compound word mode; both words from the speaker-dependent part and the part that is independent from the speaker are recognized.

Deleting the address book
The command "Delete address book" enables all or individual address book entries to be deleted.

Dialing a name
With the aid of the "Select Name" command, telephone numbers can be selected from the address book by entering the related name via a voice command. The entry is speaker-dependent and can only be requested reliably again by the person who saved the entry.

Deleting a name
With the aid of the command "Delete name" it is possible to delete entries from the address book. In doing so, there is a distinction whether the entry was created via voice input or whether the entry was created in writing. The entire entry is only deleted, if the entry was created using the voice control system (VCS).

Navigate key word (Voicetag)
If in the address book only one geocode is stored per voice command, then this is used to start the navigation system. Otherwise a question is asked as to whether the business or private address should be selected. It is also possible, though to directly enter business or private via the "keyword".

Select keyword (Voicetag)
If only one number is stored in the address book, then this number is dialed promptly. Otherwise, the system asks whether the business, mobile CTEL or the private number should be dialed. It is also possible, though to directly enter business, cellular mobile telephone or private via the "keyword".

Delete keyword (Voicetag)
With the aid of the command "Delete Voicetag" it is possible to delete voicetags from the address book. In doing so, there is a distinction whether the entry was created via voice input or whether the entry was created in writing. The entire entry is deleted, if the entry was created using the voice control system (VCS). Otherwise, only the keyword is deleted, and the remaining data in the entry are retained.

Displaying and processing an entry
Entry for which a voicetag has already been assigned, can be shown on the display of the COMAND operating, display and control unit (A40/3), with code (527a) COMAND APS (with navigation). Entries that have not been assigned a spoken keyword can be selected by spelling out. It is also possible to start the spelling process via the appropriate softkey in the address book base menu of the control field for the COMAND operating, display and control unit (A40/3), with code (527a) COMAND APS (with navigation).

The user can now select an entry from the numbered name list, the "Pick list" (the recognized results that were entered into the address book) either by typing the number of the desired entry on the telephone keypad of the COMAND operating, display and control unit (A40/3), with code (527a) COMAND APS (with navigation), or speaking the number of the desired entry.

With the command "Go forward" you can browse through to the next page. With the command "Back" you return to the previous page. With the command "Correction" you can exit the current pick list. The opened entry can then be processed or used via voice command. To do this, the voice recognition has to be restarted by using the VCS switch (S93/2).

Store name
Once an entry has been opened, a keyword can be allocated to this entry with the "save name" command.

Store number
Once an entry has been opened, a phone number can be saved for this entry with the "save number" command.

Dial
If only one number is saved in the entry, then it is dialed promptly, otherwise the system asks which numbers should be dialed. It is however also possible to specify the desired number straight away, by additionally appending "private", "portable cellular phone" or "business" to the word "Select".

Delete number
If only one number is stored in the address book, then it is deleted by using the "delete number" command, otherwise the system asks which number should be deleted.

Listening to names
By using the "Listen to name" command it is possible to listen to the keyword that has been allocated to the opened entry.

Deleting a name
By using the "delete name" command it is possible to delete the keyword that has been allocated to the opened entry.

Navigating
The Geocode that is recorded in the address book can be transmitted to the navigation system. If only one Geocode is stored navigation is started. Otherwise, the systems asks whether it should guide the user to the business or private address. It is also possible, though to directly enter "navigation business" or "navigation, private". If no valid Geocode is stored then the system issues an acoustic response.

Address book help
Following the command "Help Address Book" the voice control system (VCS) reads out the help text for the address book. The help text depends on the which help is requested:
- Outside of the address book
- Address book opened, name list displayed
- Entry opened