GF88.79-P-2005PP Retrieve Stored Outside Mirror Position, Function

GF88.79-P-2005PP Retrieve Stored Outside Mirror Position, Function

- with CODE (275) Electrically adjustable driver seat, steering column and outside mirrors with memory
- with CODE (242) Electrically adjustable front passenger seat with memory
- up to Model Year 8

Shown on model as of 24.4.04







1 Terminal status
2 Call up position
3 Move to position
M21/1 Left electrically adjustable and heated outside mirror
M21/2 Right electrically adjustable and heated outside mirror
N32/1 Driver front seat adjustment control unit with memory
N69/1 Door control unit front left
N69/2 Door control unit front right
N73 EIS [EZS] control unit
S91/2 Left front door ESA [ESV] switch group (with memory)
S91/2s14 Memory button 1, 2, 3 switch
CAN-B Controller area network bus, class B (interior compartment) (CAN B)

Function requirements
- Circuit 15R On or
- Driver door open
- No overvoltage/undervoltage
- No manual seat, mirror or steering column adjustment actuated
- Position measurement supplies valid readings

Function
The position of the left electrically adjustable and heated outside mirror and right electrically adjustable and heated outside mirror stored in the left front door control unit (N69/1) and right front door control unit (N69/2) M21/1M21 can be called via the left front door ESA switch group (with memory) (S91/2).
For this purpose, press and hold down one of the memory position buttons in the memory button 1, 2, 3 switch S91/2s14.

The driver front seat adjustment control unit with memory (N32/1) receives the memory request via the left front door control unit (N69/1) and relay it to the left front door control unit (N69/1) and right front door control unit (N69/2).
The left front door control unit (N69/1) and right front door control unit (N69/2) actuate according to the left electrically adjustable and heated outside mirror (M21/1) and right electrically adjustable and heated outside mirror (M21/2) as long as the memory button 1, 2, 3 switch (S91/2s14) is pressed or until the desired position for the selected storage location is reached.

On vehicles up to 31.8.05 the outside mirror position is stored key-related, i.e. three memory positions can be stored on each transmitter key.
This function is omitted on vehicles as of 1.9.05. Only three memory positions can be stored that are not dependent upon the key.