AR82.20-P-1000P Remove/Install Overhead Control Panel (OCP)

AR82.20-P-1000P Remove/Install Overhead Control Panel (OCP)

Illustrated On Model 203.0:

DANGER:
Risk of explosion from gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Injury hazard and danger of burning skin and eyes when handling battery acid or handling damaged lead-acid batteries
- No fire, sparks, naked flames or smoking.
- Wear acid protection gloves, clothes and goggles. Pour battery electrolyte only into suitable and appropriately marked containers.

2 Pry lens (1) off of overhead control panel control module (N70)

CAUTION: Danger of breaking headliner and overhead control panel control module (N70)

See "Special Tool" given below.

3 Actuate releases (2) of overhead control panel control module (N70)
4 Remove overhead control panel control module (N70)
5 Disconnect connectors from overhead control panel control module (N70)
6 Install in the reverse order
7 Connect STAR DIAGNOSIS, read out DTC memory


Special Tool

Assembly Wedge, P/N # 110 589 03 59 00: