AR80.35-P-0001Q Remove/Install Keyless Go Control Module in Trunk

AR80.35-P-0001Q Remove/Install Keyless Go Control Module in Trunk
- with CODE (889) Keyless Go
- with CODE (P98) Black Series







1 Remove left luggage compartment trim

DANGER!
Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries
- No fire, sparks, naked flames or smoking.
- Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers.

2 Disconnect ground cable of battery
3 Unclip rear module keyless go control module (N102)
4 Disconnect connectors (1)
5 Take out rear module keyless go control module (N102)
6 Install in the reverse order
7 Perform basic programming
8 Read diagnostic trouble code memory and erase
9 Perform function check