AR54.21-P-1262T Remove/Install Upper Control Panel (UCP)

AR54.21-P-1262T Remove/Install Upper Control Panel (UCP)












1 Remove ashtray housing (1) from front center console
2 Unclip fiber-optic cable (2) from bracket (3) towards the front
3 Unclip electrical connector (4) from bracket (3

NOTE: Number of electrical connectors (4) if equipped

4 Unscrew bolts (5)
5 Pull kinematics stowage compartment (7) or CD changer from the center console until the electrical connectors (4) and optical waveguide coupling (2) are accessible

NOTE: Depending on equipment

6 Separate electrical connectors (4)
7 Remove retaining clamp (6) and disconnect fiber-optic cable (2)
8 Cover fiber optic cable
9 Remove kinematics stowage compartment (7)
10 Open flap of kinematics stowage compartment (7) as far as possible
11 Unscrew screws (8) and remove covering (9) from the flap on the kinematics stowage compartment (7)
12 Unplug electrical connections (10) and remove upper control panel control module (N72/1)
13 Install in the reverse order