AN82.70-P-0002-01RF Retrofit Fiber Optic Wiring Harness

AN82.70-P-0002-01RF Retrofit Fiber Optic Wiring Harness
- except CODE (810) Sound system
- except CODE (819) 6-disk CD changer


1 Prepare fiber optic cable wiring harness (1) as shown in figure.

Component Identification:

2 Route fiber optic cable wiring harness (1) along present leads in vehicle as shown in figure.

Component Identification:

3 Connect straight connector to D2B telephone transmitter/receiver (A35/13) (see arrow).
4 Route fiber optic cable wiring harness (1) on center tunnel along present leads and fasten with present Velcro strips.






5 Route fiber optic cable wiring harness (1) on right along shift gate along present leads to radio shaft and fasten.

Wiring harness must be routed below ventilation duct and behind noise insulation to opening (see arrow).