Subsequently Locking Vario Roof, Function

Subsequently Locking Vario Roof, Function

If the Vario roof is not completely locked following actuation, the " Subsequent locking" function can be activated, whereby here, the power windows are not actuated in contrast to the regular Vario roof sequence.

NOTE: Subsequent locking of the roof is possible even while driving.

For this purpose, actuate the Vario roof switch (N72s16) in the direction "Open roof when the roof is open or in the direction "Close roof when the roof is closed.

Subsequent locking is accomplished when:
- the Vario roof is in a locked end position
- the tubular frame limit switch (S118/1) and/or Vario roof locked limit switches (S69/2, S69/3) change their state from a locked end position without the Vario roof switch (N72s16) being actuated
- an input value does not assume the target value after expiration of the time designed for the step in question