GF40.15-P-0001-02RB Tire Pressure Monitor (TPM), Activation

GF40.15-P-0001-02RB Tire pressure monitor (TPM), activation
- with CODE (475) Tire pressure monitor
- except CODE (494) USA version
- except CODE (498) Japan version

Component Identification:

In the event of the driver changing the air pressure, in the event of exchanging a wheel or changing a tire, the adjusted air pressure values must be stored in the TPM [RDK] control unit (N88) as specified monitoring values.

Proceed as follows:
^ Correct the air pressure at each wheel.
^ Switch on ignition (circuit 15).

Engine ON or OFF.





Use the scroll forward/back button (S110s1) to select the tire pressure monitoring system.





Appears only if ignition is not switched on.





Selection display





Message to reactivate tire pressure monitor

This message asks the driver to reactive the system. This is required if the tire inflation pressure was corrected or if the tires were changed.

Component Identification:

Press the instrument illumination rheostat and reset button (A1r1).





System messages
This display appears as a message if the tire pressure monitor was reactivated.





Information messages

This message is displayed until the individual pressure values can be assigned to the wheel positions. The four tire pressures are then displayed.





This message appears when the activation process is complete.