E. Mounting the SDARS Control Module to the Bracket

E. Mounting the SDARS control module to the bracket





1. Mount the SDARS control module (N87/5, Figure 10) to the bracket (5, Figure 10) with the three kit-included MS hex nuts (Arrows, Figure 10).

Note:
Face the connector jacks of the SDARS control module toward the longest bracket arm (Figure 10).





2. On Model 211.076 (E55 AMG), insert the anchor of the wire tie (Arrow, Figure 11) into the predrilled hole in the SDARS control module bracket and affix felt tape (B, Figure 11) on the corresponding side of the bracket assembly.

3. Proceed to Section F if the vehicle is equipped with the Level Control System; proceed to Section G otherwise.