GF91.29-P-2000S Memory Circuit, Function

GF91.29-P-2000S Memory Circuit, Function
- with CODE (275a) Memory package (driver's seat, steering column, mirrors)

Memory feature
Together with the driver's seat adjustment the adjustments of the left and right outside mirrors, the inside rearview mirror and steering column are stored.

up to 31.5.01
- Driver's side:
On the driver's side two complete seat adjustments can be stored and called up again for each transmitter key. A total of eight memory areas is available.

as of 1.6.01
- Driver's side:
On the driver's side three complete seat adjustments can now be stored and called up again for each transmitter key. Consequently a total of twelve memory areas is available.

up to 31.5.01
- Front passenger's side:
On the front passenger's side two complete seat adjustments can be stored and called up again

as of 1.6.01
- Front passenger's side:
On the front passenger's side three complete seat adjustments can now be stored and called up again.
- REAR
(model 220 with electrically adjustable individual rear seats only): Three complete seat adjustments can be stored and called up again.

Entry/exit aid as of 1.9.02 with code 275a
With the entry/exit aid the seat control module actuates the following control module when the key is removed:
- SAM/F (steering column)
- Overhead control panel (inside rearview mirror)
- Door control module (outside mirror)

The entry/exit aid enables the driver to get in and out of the vehicle more easily. Before the driver gets out the steering column is moved upwards and the seat is moved back.
After getting in the position of the seat last adjusted is approached again or the last memory position is approached.

The driving position is stored key-dependent as is the memory position. Because of this if a key is changed a new driving position of seat, steering column and mirrors assigned to the key is adjusted.
The entry/exit aid can be configured via the instrument cluster. The function can be switched off completely or partially (only the steering column is still active).

On the V 220 with individual rear seat system with code 275a the adjustment of a permanently defined position of the front passenger's and rear seat (park position) is possible from the rear door control module.