GF07.61-P-3005AM ME-SFI Ignition ON Function

GF07.61-P-3005AM ME-SFI Ignition ON Function
ENGINE 113.990 in MODEL 211, 219
ENGINE 113.991 in MODEL 215, 220
ENGINE 113.992 in MODEL 230 up to Model Year 2008
ENGINE 113.993 in MODEL 463 up to 31.5.12
ENGINE 113.995 in MODEL 230 up to Model Year 2008





A1 Instrument cluster
A1e26 "CHECK ENGINE" malfunction indicator lamp (for )
A1e58 Engine diagnosis indicator lamp (except )
B4/7 Fuel pressure sensor (model 215, 220, 230, 463)
B11/4 Coolant temperature sensor
K27/1 Fuel pump relay (model 211, 219)
K40/4 Passenger-side fuse and relay module (model 230)
K40/5kT Fuel pump relay (model 215, 220, 230)
K40/7 Right front fuse and relay module (model 215, 220)
M3 Fuel pump
M16/6 Throttle valve actuator
M16/7 Air recirculation flap actuator
N3/10 ME control unit
N10/1 Driver-side SAM control unit with fuse and relay module (models 211, 219)
N10/1 Front signal acquisition and actuation module (SAM) (model 463)
N10/2kA Fuel pump relay (model 463)
N73 EIS [EZS] control unit
N118 Fuel pump control unit (model 215, 220, 230, 463)
T1/1-
T1/8 - Cylinder 1 to 8 ignition coils
X11/4 Data link connector
Y62 Fuel injection valves

CAN CAN databus (Controller Area Network)

Functions for the case of "ignition ON"
^ Supplying voltage to the ME gasoline injection and ignition
^ system via the relevant relay module or SAM
^ Actuating the fuel pump for about 2 s as full running protection (only the first time "ignition ON")
^ The engine diagnosis indicator lamp (in case of CHECK ENGINE indicator lamp) lights up in the instrument cluster for about 1 s (lamp check)
^ Data exchange via the CAN databus (circuit 50 signal).
^ The fault memory can be read out and cleared via the data link connector.
^ Correction programming can be carried out with STAR DIAGNOSIS.