Removal and Replacement

Replace Spark Plugs







DANGER:
- Risk of death. Death may result if contact is made with parts carrying high voltages.
- Do not touch parts carrying high voltages.
- Persons who wear electronic implants (e.g.heart pacemakers) must not carry out work on the ignition system.

1 Remove cover on face end of engine
2 Remove air cleaner housing

NOTE: On Model 220, 215 it is necessary to detach the air cleaner housing by lifting it up and off the mounting points of the cylinder head covers.

3 Remove ignition coil (T1/1 to T1/6) or (T1/1 to T1/8)
4 Disconnect spark plug connectors

NOTE: Prise over cylinder head cover.

See "Special Tools" given below.

5 Remove spark plugs (R4)

Spark plugs
- For Engine 113.987/990/991 - 25 N.m
- Other Engines - 28 N.m

See "Special Tools" given below.

6 Install in the reverse order

Special Tools

Special Tools: