GF82.95-P-2007A Switching E-Call On/Off, Function
GF82.95-P-2007A Switching E-CALL On/Off, Function
MODEL 129, 202, 208.3, 210, 215, 220
- with CODE (348a) EMERGENCY CALL system
- with CODE (498) Japanese version
MODEL 203, 215, 220
- with CODE (349) E-CALL emergency call system
- with CODE (498) Japanese version
Switch-on characteristics
The EMERGENCY CALL system is switched on by turning the starter switch (S2) to circuit 15R. The switch-on procedure is indicated by the indicator lamp (5 s) flashing in the EMERGENCY CALL system pushbutton switch (S93/3). The system is ready for operation.
with code 348a:
After switch-on the E-CALL control module (A35/8) activates the CTEL transmitter/receiver (A35) and waits for the readiness confirmation of the emergency tensioning retractor control module with airbag (AB, N2/2).
with code 349:
After switch-on the E-CALL control module (A35/8) is activated and waits for the readiness confirmation of the emergency tensioning retractor control module with airbag (AB, N2/7)
With code 349 the CTEL transmitter/receiver is integrated into the emergency call system control module.
In models 203, 215, 220 the emergency tensioning retractor control module with airbag (AB) (N2/2) is replaced with the restraint system control module (N2/7).
Switch off characteristics
- EMERGENCY CALL is switched off with a delay of 10 min., when circuit 15R of the starter switch (S2) is switched off, no emergency call is active and the telephone is not set to shut- off delay.
When ICS 2 and COMAND are switched on, it is still possible to make a call in spite of circuit 15R: OFF" for a certain time.
- For control of the telephone system EMERGENCY CALL remains also active during the telephone shut-off delay, however, it is not possible to trigger an emergency call.
- During an EMERGENCY CALL the system is only switched off when the emergency call is terminated.
- When circuit 15R is switched off and an authorization is simultaneously accomplished, it is interrupted and the EMERGENCY CALL then switched off.