Procedures

AZ82.70-P-0002-01QA Retrofit Antenna Line
- with CODE (494) USA version


1 Connect antenna plug (9) of antenna extension line (8) as per picture onto SDAR control unit (1).
2 Route antenna extension line (8) along on-board wiring harnesses from SDAR control unit (1) to bracket for antenna connectors (see arrow) as per picture and fix in place.







3 Fit antenna connector (7) of antenna extension line (8) in bracket for antenna connectors (see arrow).

The antenna connector (7) is connected to the SDAR antenna wiring harness at a later stage.