SM77.31-P-0002-01A Glue Fold Seam to Tension Cable

SM77.31-P-0002-01A Glue Fold Seam To Tension Cable







1. Mask off area not to be bonded using adhesive tape.







2. Mix adhesive.

Adhesive (2) and hardener (3) are both included in the package. Remove plastic slider and mix components with the package closed.

3. Put adhesive on a clean underlay.







4. Apply adhesive with brush supplied.







5. Set adhesive seam.

Allow adhesive seam to harden for min. 5 hours. Do not apply any stress to the bond.