A/T - Limp Home Mode/Various Codes Set
Date: January 4, 2008Order No.: P-B-27.50/59b
Supersedes: P-B-27.50/59a dated March 16, 2006
Group: 27
Revision History
Revision Date Purpose
b 1/4/08 Operation Code Updated
a 3/16/06 Warranty Information Updated
- 10/13/05 Initial issue
SUBJECT:
Model 171.454/456/473
Model 203.052/054/056
Model 209.356/375/456/475
Model 211.056/070/256
Model 215.375
Model 219.375
Model 220.170/175
Model 230.475
Equipped with 7G-Tronic Transmission (NAG2)
Transmission in Limp Home Mode with Fault Codes 2200, 2201, 2767 and 2768
If you receive customer reports in the above model vehicles of the transmission being in limp home mode with fault codes 2200, 2201, 2767 and 2768, the condition can be related to an unfavorable production tolerance of the speed sensor ring of the K1 shift member.
In such cases, the flange (Figure 1, call-out 164) should be replaced to resolve. Follow the work procedures outlined in WIS Document AR27.51-P-0800W (Dismantling and Assembling clutch K1) as well as the other associated documents.
Note:
This work procedure only applies to the above fault codes and to transmissions with a production range of 7229xx 00 327088 to 7229xx 00 338693. For transmissions outside of the given production range, replace the electro-hydraulic control unit only. Refer to EPC for the specific application / part number.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on January 4, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.