GF72.29-P-3004QB Power Window Comfort Opening, Function

GF72.29-P-3004QB Power Window Comfort Opening, Function

Comfort opening via soft top switch

Component Identification:

Function requirements
^ Terminal 15 ON
^ No overvoltage or undervoltage
^ No errors at the outlets for actuation of the soft top actuators and power windows
^ No roll bar actuation active

The comfort opening function is also performed on non-normalized windows.

Abort
The comfort opening function is interrupted if the function prerequisites mentioned above are no longer fulfilled.

Function
If the soft top control switch (S84/10) in the center console is pulled twice within t < 0.5 s and then held, all four side window open

If the soft top control switch (S84/10) is only pulled once and held, all four side window and the soft top open.

The actuation request is transmitted to the power soft top control module (N52) by the soft top control switch (S84/10) and is relayed to the left door control module (N69/1) as well as the right door control module (N69/2) via CAN class B bus
The left front power window motor (M10/3) is actuated by the left door control module (N69/1), the right front power window motor (M10/4) by the right door control module (N69/2).
The left rear power window motors (M10/5) and right (M10/6) are directly actuated by the power soft top control module (N52).