AD00.00-P-2000-04TX Connect Star Diagnosis and Read Out Fault Memory

AD00.00-P-2000-04TX Connect Star Diagnosis and Read Out Fault Memory

Commercially available tools












0100 Star Diagnosis
X11/4 Data link connector


1 Connect STAR DIAGNOSIS (0100) to data link connector (X11/4)
2 Switch on ignition.
3 Start DAS.
4 In the "models" menu select "more model series".
5 According to instructions on screen:
a Control unit version
b Read out/delete diagnostic trouble code memory
c Read out actual values
d Perform actuations
e Control unit adaptations

6 Disconnect STAR DIAGNOSIS (0100).

Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.