E. Installing and Connecting the Control Module For the Voice Control System (VCS)

1. Mount the VCS control module (Figure 10) to the embedded bracket in the right side compartment-under the antenna switch-of the carrier plate:

a. Slide the right side tab (A, Figure 10) of the VCS control module under the bracket clip on the carrier plate floor.

b. Secure the left side tab (B, Figure 10) of the VCS control module with a self- tapping Phillips head screw.

Note:
Face the receptacle for the power supply connector out, toward the vehicle rear (Figure 10).





2. Connect the VCS power supply connector (Figure 11) to the VCS control module.