GF82.10-P-3002T Low-Beams Actuation, Function

GF82.10-P-3002T Low-Beams Actuation, Function
- with CODE (614) Bi-xenon headlamp unit
- with CODE (615) Bi-xenon headlamp unit with integrated curve illumination

Component Identification:

Function requirements
^ Circuit 61 On or
^ Engine speed > 300 rpm for t < 2 s
^ Combination switch (S4) in center position (low beam switch position)

Function
The rotary light switch (S1) is set to the low beam position and notifies the driver-side SAM control unit with fuse and relay module (N10/1) "Daytime running lights on".
The driver-side SAM control unit with fuse and relay module (N10/1) actuates the left low beam (E1e2) in the left front lamp unit (E1) and transmits the signal via CAN class B to the passenger-side SAM control unit (N10/11).
The passenger-side SAM control unit (N10/11) actuates the right low beam (E2e2) in the right front lamp unit (E2).

The standing lamp in the left front (E1) and right front (E2) lamp unit is still actuated when the driving lights are switched on. Actuation of the instrument cluster (A1) with the "driving lights On" signal triggers a chime if the transmitter key (A8/1) has been removed and the driver door is open.