AZ82.60-P-0001-03TAA Retrofit iPod Interface

AZ82.60-P-0001-03TAA Retrofit iPod Interface
- with CODE (527) COMAND APS with single DVD drive (with navigation)


1 Centrally align two of the Velcro strips (2) included in package contents and press together firmly.
2 Remove protective foils and glue Velcro strips (2), as illustrated, onto the iPod interface (1).







3 Remove hatched area (A) of insulation mat (3) on cover below instrument panel on right (4).
4 Clean exposed bonding surfaces on cover below instrument panel on right (4).

The bonding surfaces must be dry, free of dust and grease.







5 Remove protective foils from Velcro strips on iPod interface (1) and glue iPod interface (1), as illustrated, onto cover below instrument panel on right (4).

Glue on iPod interface (1) such that black iPod wiring harness coupling (5), which will be connected later on, fits into cutout (arrow) of air duct.