AN82.61-P-0001-06TAD Retrofit MOST Fiber Optic Cable Wiring Harness

AN82.61-P-0001-06TAD Retrofit MOST Fiber Optic Cable Wiring Harness
- with CODE (523) MB Audio 20 radio

Component Identification:

1 Unclip cover (23) of fiber optic cable connector (MOST) (X39/50) in direction of arrow (arrow A).
2 Remove dust cap (24) (no longer required) of optical conductor connector sleeve (Z35/11).
3 Insert optical conductor connector sleeve (Z35/11) in direction of the arrow (arrow B) into fiber optic cable connector (MOST) (X39/50).

The optical conductor connector sleeve (Z35/11) must audibly latch into place.

4 Clip covering (23) onto fiber optic cable connector (MOST) (X39/50).

Component Identification:

The fiber optic cable wiring harness (MOST) (7) is routed forward starting from the left of the trunk.

5 Insert black 4-pin coupling (6) from auto pilot system wiring harness (1) into black 6-pin coupling housing (8) of fiber optic cable wiring harness (MOST) (7).

The black coupling housing (8) is from audio gateway control unit (N93/1). An arrow is located at the side of the black 4-pin coupling (6). This corresponds to the direction of installation into the black coupling housing (8).

6 Connect the black coupling housing (8) to the audio gateway control unit (N93/1).
7 Fasten fiber optic cable wiring harness (MOST) (7) as shown on left wheel arch to on-board wiring harness.

The green color coding on the MOST fiber optic cable wiring harness (7) must match the green color coding of the on-board wiring harness (arrow D).

8 Route MOST fiber optic cable wiring harness (7) further into left cable duct in left front footwell.
9 Route fiber optic cable wiring harness (MOST ) (7) from left footwell cable duct along parking brake cable (16) to radio recess and fix in place.

10 Insert black 2-pin coupling (25) from fiber optic cable wiring harness (MOST) (7) into included black coupling housing (8).
11 Insert black 4-pin coupling (6) from auto pilot system wiring harness (1) into black coupling housing (8).

Observe installation position (arrow).