AR54.15-P-1340TA Remove/Install Rear Prefuse Box

AR54.15-P-1340TA Remove/Install Rear Prefuse Box







1 Disconnect ground cable of battery
2 Mark installation position of individual supply lines (red) (1)

NOTE: Number of supply lines (red) (1) varies depending on equipment configuration

3 Detach supply lines (red) (1) at the rear prefuse box (F33) and put the supply lines (red) (1) to one side

NOTE
- Nuts remain attached to supply lines (red)(1).
- Installation: Observe installation marking.

- Nut, cable connection to rear prefuse box M6: 7 N.m.

4 Unclip fuse holder (2) at the rear prefuse box (F33)

NOTE
- Number of fuse holders (2) varies depending on equipment configuration.
- Installation: Pay attention to color coding of fuse holders (2).

5 Detach positive lead (black) (3) and put to one side

- Nut, cable connection to rear prefuse box M8: 21 N.m.

6 Disconnect electrical connector (4) at the rear prefuse box (F33)

NOTE
- Number of electrical connectors (4) according to equipment.
- Installation: Pay attention to color coding of electrical connectors (4).

7 Unclip rear prefuse box (F33) from latching hook (5) and remove

NOTE: Push latching hook (5) to side.

8 Install in the reverse order.