GF82.70-P-3002T Station List, Function

GF82.70-P-3002T Station List, Function
- with CODE (813) Voice control sytem (VCS [SBS])


Function
The voice control system (VCS) allows the user to create a list of stations. Stations selected frequently can be stored here together with freely selectable names or the proper station name. 10 entries can be stored.
To create or expand the personal list of stations after switching on the operating unit and activating the VCS [SBS] switch (S93/2), the user has to say the editing command "Store station". After saying the editing command, the user is requested by the VCS [SBS]to enter a station name.
"Please say name".

If this name has been entered by the user, the VCS requests the user to say the name again as confirmation. If a different name is given when the name is entered the 2nd time (confirmation), the VCS [SBS] voice output requests the user to "Please say again".
If the user then enters the first name, the VCS [SBS] requests the user to repeat the name again. The system stores the station list entry (name and associated station) in the station list only when the associated name and its repetition are identical. The system voice output then indicates "Station stored".

Calling up station list entries
The VCS user can use the editing command "Read list of stations" to have the complete list of stations read out. In so doing, the user can select a specific station name to tune into a new station. Selection is accomplished by actuating the VCS switch (S93/2).

Selecting station from station list
The VCS [SBS] user can use the editing command "Select station" to select a station in the list of stations. After this editing command, the VCS [SBS] asks the user to "Please say name" for this station. If the user says the name specified previously while storing the station, then the voice control system VCS switches to the desired station after the user has repeated the station name.

Deleting individual entries from the station list
After activating the VCS [SBS] using the VCS [SBS] switch (S93/2), the user can use the editing command "Delete station" to delete an individual entry from the list of stations. The VCS then requests that the name of the station to be deleted is stated.
After entry of the station name by the user, he/she is asked whether the selected name is really to be deleted.
If the user answers "Yes", then the specified station name is deleted from the station list together with the VCS [SBS] note "Station deleted". If the user answers "No", the station name remains stored.
Any other word spoken by the user terminates dialog with the VCS [SBS].

Deleting entire station list
After activating the VCS using the VCS switch (S93/2) the user can use the editing command "Delete station list" to delete all entries from the list of stations.
The editing command is followed by a VCS voice output, asking whether the list of stations really should be deleted. If the use answers with "Yes", then the user is asked by a voice output: "Are you sure?". If the user answers "Yes" to this question, all station list entries are deleted. If the user answers with "No", the VCS starts to read out the station list entries.

While the station list is being read aloud, the user can select a station to be deleted by operating (activating) the VCS [SBS] switch (S93/2). The selected station is then repeated by the VCS [SBS]. The user is then asked, as a confirmation, if the selected station really is to be deleted.
If the user answers "Yes", the specified station is deleted from the station list. If the user answers "No", the system continues reading the station list entries aloud. Any other word terminates dialog with the VCS.
The user can interrupt the dialog with the VCS at any time by activating the VCS switch (S93/2).