Lengthen Intake Fitting In Fuel Tank (SM82.70-P-0010-01B)

SM83.70-P-0010-01B Lengthen Intake Fitting In Fuel Tank
- with CODE (228) Stationary heater







Shown on model 211

1. Slide the intake fitting extension (1) through the opening for the right tank half fuel level sensor (B4/2) of the fuel tank (3) onto the intake fitting (2) of the stationary heater over a length of approx. 10-15 mm.

The intake fitting (2) of the stationary heater is located in the right of the fuel tank (3) (see picture).

The chamfered side of the intake fitting extension (1) must point downwards.

The intake fitting extension (1) must not be touching the bottom of the fuel tank.