AR82.10-P-4730M Remove/Install Headlamp Unit

AR82.10-P-4730M Remove/Install Headlamp Unit
- except CODE (612b) Xenon headlamp unit
- except CODE (614) Bi-xenon headlamp unit







1 Open engine hood, position vertically
2 Remove bolts (1,2)
3 Unclip electrical connection (3) and remove
4 Fold fastening shackle of bumper (4) forward slightly (arrow) and remove left lamp unit (E1) to vehicle center

NOTE: Installation: Make sure that the ball head (5) on the lamp unit's housing is correctly seated

CAUTION: Make sure that you do not cause any paint damage to the bumper and fender by, for example covering them with a clean cloth

5 Install in the reverse order

Inspect
6 Check headlamp adjustment and correct if necessary.