GF82.70-P-0007RI Mobile Phone System, Function

GF82.70-P-0007RI Mobile Phone System, Function
- with CODE (386) Mobile phone
- Comfort telephony
- with CODE (389) Mobile phone preinstallation with universal interface, USA/Canada
- with CODE (512) COMAND APS with DVD changer
- Basic telephony
- with CODE (528) COMAND with DVD changer, without navigation

Function requirements
^ Status "Circuit 30 ON" or "Circuit 15R ON"
^ One mobile phone network is available in sufficient strength and quality
^ Mobile phone system operating error-free
^ Enabled Subscriber Identification Module (SIM) card inserted in mobile phone
^ Compatible mobile phone inserted into UPCI [UHI] cell phone holder (Universal Portable Cell Phone Interface) (A34/15), which is connected to Bluetooth module (A34/7) (comfort telephony) or Bluetooth-capable mobile phone in vehicle and authorized at the COMAND operating, display and controller unit (A40/3) (basic telephony)

General
A distinction is made between the following 2 versions for the mobile phone system:
- Basic telephony
- Comfort telephony

Both versions use Bluetooth technology for data transfer.

In order to be able to operate a mobile phone in the vehicle that has Bluetooth capability and is authorized at the COMAND operating, display and controller unit, the mobile phone must support Hands Free Profile (HFP) 1.0 or 1.5. More information is available under:
- www.mercedes-benz-mobile.com

The mobile phone system consists of the following subfunctions, which are described in separate documents:
^ Switching on and off characteristics
^ Establishing call and terminating call
^ Accepting and rejecting calls
^ Short Message Service (SMS), with comfort telephony, with code (386) Mobile phone or with code (389) Mobile phone preinstallation with universal interface, USA/ Canada
^ Mercedes-Benz Contact, except code (830) China version or except code (494) USA version
^ Voice control, with code (512) COMAND APS including DVD changer

The system is described using the comfort telephony as an example. Differences from the basic telephony are marked by the symbol.

Address book
The address book contains the address entries stored in the COMAND operating, display and controller unit. The user can manage all the contact data in the address book (view, edit, add, delete and create). The data from the phone book of the mobile phone can also be loaded into the address book of the COMAND operating, display and controller unit.
The data from the mobile phone's phone book are then permanently available, even if the mobile phone is no longer inserted in the cradle.

Address entries can only be removed by deleting individual entries or by deleting the entire address book.
The Bluetooth interface of the mobile phone and the Bluetooth antenna (A2/91) can be used to transmit data from other external devices (e.g. PDA, laptop, etc.) into the address book. These data are then permanently available as address entries. The address- relevant applications for telephony can be started directly via the address book entries and provided with the data stored. The address book is activated via the telephony (Tel) base function and then via the address book menu item in the function bar.

In vehicles with basic telephony, it is possible to gain read access to the telephone book of the mobile phone, if the mobile phone supports the Bluetooth profile Phone Book Access Profile (PBAP). Otherwise the data from the phone book of the mobile phone can also be loaded into the COMAND operating, display and controller unit using "vCards". Additionally, the user can enter or select a telephone number in the following ways:
- Telephone buttons on COMAND operating, display and controller unit
- Telephone number already selected from the call lists
- Already edited telephone numbers from the address book of the COMAND operating, display and controller unit

Address entries can contain the following:
- Names (surname and first name)
- Postal addresses (private or business)
- Telephone numbers (private, business, fixed line network, mobile or car)
- Geo position (private or business)
- Company name

50 entries can have voice commands (Voice Tags) added to them for the voice control system (VCS [SBS]), with code (512) COMAND APS incl. DVD changer. The address entries stored in the address book in the COMAND operating, display and controller unit and the data loaded from the mobile phone are displayed.