GF82.70-P-3002R Station List, Function

GF82.70-P-3002R Station List, Function
- with CODE (813) Voice control sytem (VCS [SBS])

Component Identification:

Creating station list
The voice control system (VCS) allows the user to create a personal list of stations. Stations selected frequently can be stored in the voice control system control unit (A35/11) under freely selectable names or the actual station name. 15 entries can be stored.
To create or expand a personal list of stations when the radio (A2) or COMAND operating, display and control unit is switched on (A40/3), the user first activates the VCS with the VCS switch (S93/2) and then activates the radio through the VCS by saying the command "Radio" followed by the command "Store station".

Next, the VCS prompts the user to "Please say the name" for this station. When this name has been entered by the user, the voice control system prompts the user to say the name again with the voice output "Please repeat the name".
If a different name is given when the name is entered the second time, the VCS voice output requests the user to "Please say again". If the user then enters the first name, the VCS requests the user to repeat the name again. The system stores the station list entry (name and associated station) in the station list only when the associated name and its repetition are identical. The system voice output then indicates "Station stored".

Calling up station list entries
The VCS user can use the editing command "Read list of stations" to have the complete list of stations read out. In so doing the user can select a specific name and set a new station. Selection is accomplished by actuating the VCS switch (S93/2).

Selecting station from station list
The VCS user can use the editing command "Select station" to select a station in the list of stations. After successfully entering this editing command, the user is requested by the VCS to "Please say the name" for entry of the station name. If the user names a station already in the station list, the VCS asks the user to repeat the name. After this, the radio changes to the desired station

Deleting individual entries from the station list
The user can delete an individual entry from the station list by saying the voice command "Delete station". The VCS then prompts the user to specify the station to be deleted with the command "Please say the station name". After saying the station name, the user is asked if the name should really be deleted. If the user answers "Yes", the specified station name is deleted from the station list and confirmed by the VCS voice output message "Station deleted". If the user responds with "No", the name remains stored.
Any other word spoken by the user terminates dialog with the VCS.

Delete entire station list
The voice control system (VCS) allows the user to create a personal list of stations. The user can delete all entries from the station list by saying the voice command "Delete station list". After this command is spoken, the user is prompted with "Do you really want to delete the station list" to confirm the action. If the use responds with "Yes", the VCS asks the user to reconfirm the decision to delete the entire list by responding to the security prompt "Are you sure?"
If the user answers this question with "Yes", all station list entries are deleted. If the user answers "No", the VCS starts to read out the station list entries.

While the station list is being read aloud, the user can select a station to be deleted by activating the VCS switch (S93/2). The selected station is then repeated by the VCS. The user is then asked, if he/she really wants to delete the selected station. If the user answers "Yes", the specified station is deleted from the station list. If the user answers "No", the system continues to read the telephone book entries aloud. Any other word terminates dialog with the VCS.
Moreover, the user can cancel dialog with the VCS at any time with the VCS switch (S93/2).