Reset Service Indicator [Serv. A - H] (Illustrated)

AP00.20-P-0042RMG Reset service indicator (Illustrated)

Preliminary Procedures
- Close trunk lid or liftgate as well as engine hood and doors.

SmartKey:

SmartKey With KEYLESS-GO:

1. Switch on ignition to position "2" (Make sure automatic transmission is in park position "P" and do not depress the brake pedal) or press and release Start/Stop button twice (Make sure automatic transmission is in park position "P" and do not depress the brake pedal).

Early Production - Steering Wheel:

Late Production - Steering Wheel:

Multifunction Display:

2. Press the Main-menu System selection buttons (-red arrows-) repeatedly until the total mileage reading is shown in the left Multifunction Displays (-Double red arrows-).

Early Production - Steering Wheel:

Late Production - Steering Wheel:

Service Symbol - Service Menu:

3. Press the Sub-menu System selection buttons (-red arrows-) repeatedly until the service symbol is shown in the left Multifunction Displays (-Double red arrows-).

Trip Odometer Reset/ Instrument Cluster Illumination Button:

4. Press and hold the Trip Odometer Reset/ Instrument Cluster Illumination button (-red arrow-) for approximately 5 seconds.
In the right and left Multifunction Displays the message "SERVICE INTERVAL...Reset: Press reset button for 3 seconds" appears. Release the Trip Odometer Reset/ Instrument Cluster Illumination button.

Trip Odometer Reset/ Instrument Cluster Illumination Button:

5. Press and hold the Trip Odometer Reset/ Instrument Cluster Illumination button (-red arrow-) for approximately 3 seconds
In the right and left Multifunction Displays, the message "The service interval was reset" appears. Release the Trip Odometer Reset/ Instrument Cluster Illumination button.

SmartKey:

SmartKey With KEYLESS-GO:

6. Switch off ignition to position "0" and release ignition key (or depress the Start/Stop button one time to turn ignition off).

7. Recheck work