GF82.10-P-3013R Emergency Lamp Control, Function

GF82.10-P-3013R Emergency Lamp Control, Function

Function
The emergency lamp actuation is intended to prevent the complete failure of the exterior lights caused by a fault in the
^ Driver-side SAM control unit (N10/10),
^ SAM control unit, front-passenger side (N10/11),
^ Rear SAM control unit (N10/8).
The emergency lamp is switched on within 1.5 s with circuit 15 On.

Emergency lamp actuation
In the event of a failure of the Controller Area Network bus class B (interior) (CAN-B) or the driver-side SAM control unit (N10/10), the following lamps are activated:
^ actuated by the driver-side SAM control unit (N10/10)
- left standing and parking lamp (E1e3)
- right low beam (E2e2)
^ actuated by the passenger-side SAM control unit (N10/11)
- right standing and parking lamp (E2e3)
- left low beam (E1e2)

^ actuated by the rear SAM control unit (N10/8)
- left stop lamp, taillamp and parking lamp (E3e9)
- right stop lamp, taillamp and parking lamp (E4e9)
- left license plate lamp (E19/1)
- right license plate lamp (E19/2)

In the event of a failure of the passenger-side SAM control unit (N10/11), the following lamps are activated:
- Right standing and parking lamp (E2e3)
- Left low beam (E1e2)

In the event of a processor failure in the rear SAM control unit (N10/8), within 3 s the following lamps are activated:
- Left stop lamp, taillamp and parking lamp (E3e9)
- Right stop lamp, taillamp and parking lamp (E4e9)
- Left license plate lamp (E19/1)
- Right license plate lamp (E19/2)