AH05.20-P-0300-01A Slackening and Tightening Sequence

Slackening and tightening instructions for the camshaft bearing caps





Tightening instructions for left cylinder head

1 Tighten screws stepwise according to the specified sequence.

At the same time the bearing caps must not tilt.

Slackening instructions for left cylinder head

The slackening of the screws is performed in the reverse order.





Tightening instructions for right cylinder head

1 Tighten screws stepwise according to the specified sequence.

At the same time the bearing caps must not tilt.

Slackening instructions for right cylinder head

The slackening of the screws is performed in the reverse order.