AN82.70-P-0002-01PA Retrofitting Optical Waveguide Wiring Harness

AN82.70-P-0002-01PA Retrofitting Optical Waveguide Wiring Harness
- Model 203.0 with CD changer, without sound system
- with CODE (819a) CD changer except CODE (810) Sound system
- except CODE (855) TELE AID in combination with COMAND or radio in the Audio range






1 Remove the optical waveguide routed during production between radio (A2) and CD player with changer (A2/6) (no longer needed).






2 Prepare optical waveguide wiring harness (1) as shown in figure.

Illustrated on Model 203 sedan with radio
A2 Radio
A2/6 CD player with changer
A34/4 Telephone interface
X39/43 Optical waveguide connector D2B






3 Route optical waveguide wiring harness (1) in vehicle as shown in figure.

A2 Radio
A2/6 CD player with changer
A34/4 Telephone interface
X39/43 Optical waveguide connector D2B






4 Route branch-off line from optical waveguide wiring harness (1) to radio (A2) and CD player with changer (A2/6) in cable duct in front of passenger's seat as shown in figure and fasten with felt.






5 Route branch-off line from optical waveguide wiring harness (1) to radio (A2) and CD player with changer (A2/6) in instrument panel as shown in figure.






6 Route branch-off lines to radio (A2) in radio recess.

1 Wiring harness for optical waveguide
12 D2B terminal






7 Route optical waveguide wiring harness (1) in right cable duct toward rear
8 Insert the two optical waveguide connectors D2B (X39/43) in the cable duct for the right rear door as shown in figure.






9 Route optical waveguide wiring harness (1) over the right wheel housing along existing leads in the trunk.






10 Route branch-off line from optical waveguide wiring harness (1) to the telephone interface (A34/4) on the accessories plate along existing leads and fasten with felt.