AR82.70-P-0010A Remove/Install E-Network Compensator

AR82.70-P-0010A Remove/Install E-Network Compensator
- with CODE (854) MB portable CTEL







1 Connect quiescent current retention unit

See "Commercially Available Tools" given below.

DANGER:
- Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries.
- No fire, sparks, naked flames or smoking.
- Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers.

3 Remove floor paneling in trunk
4 Remove cover on control module plate

NOTE: Remove the 2 screws of the tie eyes.

5 Disconnect connector on E network compensator (A28/3)
6 Unscrew antenna connections
7 Unclip E network compensator (A28/3) and remove
8 Install in the reverse order

Commercially Available Tools

Commercially Available Tools: