Blower Motor: Service and Repair

AR83.25-P-1200P Remove/Install Blower Motor

Shown on Model 203.0:

1 Remove cover below instrument panel (right) [1][2]Procedures
2 Disconnect coupling from electronic blower control unit (A32n1)
3 Expose lead at blower motor (A32m1)
4 Unscrew bolts (1)
- See "Special Tools" given below.

5 Remove blower motor (A32m1) with blower control unit (A32n1)

CAUTION: Do not lay blower motor (A32m1) on the fan wheel.

6 Install in the reverse order.

Special Tools

Torx bit set, P/N# 000 559 01 10 00: