AN82.70-P-0002-01AP Retrofitting Optical Waveguide Wiring Harness

AN82.70-P-0002-01AP Retrofitting Optical Waveguide Wiring Harness
- Model 203.0 without CD changer and without sound system






1 Prepare optical waveguide wiring harness (1) as shown in figure.

A2 Radio
A34/4 Telephone interface
X39/43 Optical waveguide connector D2B






2 Route wiring harness (1) along existing leads in the vehicle as shown in the figure.

Illustrated on Model 203 sedan with radio
A2 Radio
A34/4 Telephone interface
X39/43 Optical waveguide connector D2B
rt red insert
ws white insert






3 Route branch-off line from optical waveguide wiring harness (1) to radio (A2) in cable duct in front of passenger's seat as shown in figure and fasten with felt.






4 Route branch-off lines to radio (A2) in radio recess.

1 Wiring harness for optical waveguide
12 D2B terminal






5 Route optical waveguide wiring harness (1) in right cable duct toward rear.
6 Insert the two optical waveguide connectors D2B (X39/43) in the cable duct for the right rear door as shown in figure.






7 Route optical waveguide wiring harness (1) over the right wheel housing along existing leads in the trunk.






8 Route optical waveguide wiring harness (1) on the accessories plate to the telephone interface (A34/4), connect and fasten with felt.