AR33.10-P-0100-01P Attaching Engine Supporting Frame and Lifting Engine

AR33.10-P-0100-01P Attaching engine supporting frame and lifting engine
- except CODE (P98) Black Series

Special Tools:

Component Identification:

Alternatively the engine lifting device (01) or engine carrier arm (1) can be used.

Put on engine carrier arm
1 Mount engine carrier arm (1) with its supports on the inner folds of the right and left fender (arrows).

In the process ensure that the paint on the two fenders is not damaged.

2 Lift engine by the front lifting eye.

Engine carrier arm, shown on model 203 with engine 111

Component Identification:

Engine lifting device, shown on model 209 with engine 272

Component Identification:

Mount engine lifting device
Observe the manufacturer's assembly specifications and safety information on the engine hoist (01), in order to avoid assembly faults.

1 Mount preassembled engine hoist (01) on the strut towers and longitudinal member.

When mounting ensure that no lines or hoses are pinched and no paint is damaged in the area of the area of the longitudinal member and suspension strut tower.

2 Adjust the engine hoist (01) and tighten the bolted connections.
3 Detach the hose (1) from the electrical air pump (M33).

Only on vehicles with engine 271, 272, 273.

4 Mount lifting device (01a) on the front engine lifting eye.
5 Tighten clamping bolt (01b) and raise engine.