GF82.61-P-4001QM Destination-Oriented Navigation In Non-Digitalized MAP Area, Function

GF82.61-P-4001QM Destination-Oriented Navigation In Non-digitalized Map Area, Function
- with CODE (527) COMAND APS (with navigation)


When traveling outside the digitized map area (e.g. company sites, multilevel car parks, tracks across fields, etc.), but still within the digital versatile disk (DVD) map limit, the navigation processor of the COMAND operating, display and controller unit (A40/3) switches over to "Destination-oriented navigation in the non- digitized map area". The COMAND operating, display and controller unit (A40/3) shows the message:
^ "OFF ROAD"

In addition, if the vehicle is outside the DVD map limits (outside the country), the following message appears:
^ "OFF MAP"

When entering the OFF-ROAD mode, the street map is opened and a route information is displayed.

In both cases only basic position finding (composite positioning) takes place with rectification through the global positioning system (GPS) data.

A (limited) destination-oriented navigation can be conducted only with specification of the:
^ Straight-line distance to the destination
^ Direction to destination (as an arrow)

After reentering the digitized map area, the system automatically continues with "Destination-oriented navigation in digitized map area". The GPS position can be used to determine the possible roads, on which the vehicle may be located. During this process a slight delay in the destination-oriented navigation may result.

In the event of the message "OFF MAP", comprehensive destination-oriented navigation can be continued after loading a corresponding abroad DVD.