GF80.45-P-2009Q Comfort Closing/Opening With Air Recirculation Button, Function
GF80.45-P-2009Q Comfort Closing/Opening With Air Recirculation Button, Function
- up to 08
- as of 09
- except CODE (494) USA version
- except CODE (460) CANADA version
Component Identification:
Convenience closing via recirculated air switch (N22s2 or N22/7s2)
The windows and the tilting/sliding roof (with code (414) Electric glass tilting/sliding door ) can be closed during convenience closing.
Function requirements:
^ Circuit 15 ON
^ Windows and titling/sliding roof synchronized
^ Voltage not to high or too low
The function is interrupted when
^ Function requirements not satisfied
^ Actuation of power window switch or SR switch (N70s1) in any direction,
^ by lock-up recognition,
^ by activation of excessive force limitation,
^ if zero point tolerance is exceeded,
^ by present short stroke request (stops power window in short stroke position),
^ by canceling the actuation request,
^ Failure of message via interior CAN (CAN B).
Function
When the air recirculation switch (N22s2 or N22/7s2) on the AAC [KLA] control and operating unit (N22) or on the comfort AAC control and operating unit (N22/7) is actuated, the windows and the tilting/sliding roof can be closed completely. The actuation request is relayed by the AAC [KLA] control and operating unit (N22) or comfort AAC control and operating unit (N22/7) via the interior CAN (CAN B) to the
^ left door control unit (N69/1),
^ right door control unit (N69/2),
^ rear control unit (N22/6),
^ overhead control panel control unit (N70)
which then store the corresponding position and actuate the
^ left front power window motor (M10/3),
^ right front power window motor (M10/4),
^ left rear power window motor (M10/5),
^ right rear power window motor (M10/6),
^ SR motor (M12m1),
in the "closing" direction until the corresponding windows or the tilting/sliding roof are closed or until the air recirculation switch (N22s2 or N22/7s2) is released.
Convenience closing via recirculated air switch (N22s2 or N22/7s2)
The windows and the tilting/sliding roof (with code (414) Electric glass tilting/sliding door ) can be closed during convenience closing.
Function requirements:
^ Circuit 15 ON
^ Windows and titling/sliding roof synchronized
^ Voltage not to high or too low
The function is interrupted when
^ Function requirements not satisfied
^ Actuation of power window switch or SR switch (N70s1) in any direction,
^ by lock-up recognition,
^ by activation of excessive force limitation,
^ if zero point tolerance is exceeded,
^ by present short stroke request (stops power window in short stroke position),
^ by canceling the actuation request,
^ Failure of message via interior CAN (CAN B).
Function
When the air recirculation switch (N22s2 or N22/7s2) on the AAC [KLA] control and operating unit (N22) or on the comfort AAC control and operating unit (N22/7) is actuated, the windows and the tilting/sliding roof can be closed completely. The actuation request is relayed by the AAC [KLA] control and operating unit (N22) or comfort AAC control and operating unit (N22/7) via the interior CAN (CAN B) to the
^ left door control unit (N69/1),
^ right door control unit (N69/2),
^ rear control unit (N22/6),
^ overhead control panel control unit (N70)
which then store the corresponding position and actuate the
^ left front power window motor (M10/3),
^ right front power window motor (M10/4),
^ left rear power window motor (M10/5),
^ right rear power window motor (M10/6),
^ SR motor (M12m1),
in the "closing" direction until the corresponding windows or the tilting/sliding roof are closed or until the air recirculation switch (N22s2 or N22/7s2) is released.
Convenience opening via recirculated air switch (N22s2 or N22/7s2)
The windows and the tilting/sliding roof (with code (414) Electric glass tilting/sliding door )can be opened during convenience opening.
Function requirements:
^ Circuit 15 ON
^ Windows and titling/sliding roof synchronized
^ Voltage not to high or too low
^ previous convenience closing via recirculated air switch (N22s2 or N22/7s2)
This function is discontinued in the event of
^ Actuation of power window switch or SR switch (N70s1) in any direction,
^ by lock-up recognition,
^ reaching stored position,
^ by canceling the actuation request,
^ Failure of message via interior CAN (CAN B).
Function
When the air recirculation switch (N22s2 or N22/7s2) on the AAC [KLA] control and operating unit (N22) or comfort AAC control and operating unit (N22/7) is actuated, the windows and the tilting/ sliding roof can opened to their previously stored position. The actuation request is transmitted by the AAC [KLA] control and operating unit (N22) or comfort AAC control and operating unit (N22/7) via the interior CAN (CAN B) to the
^ left door control unit (N69/1),
^ right door control unit (N69/2),
^ rear control unit (N22/6),
^ overhead control panel control unit (N70)
which then accordingly actuates the
^ left front power window motor (M10/3)
^ right front power window motor (M10/4)
^ left rear power window motor (M10/5)
^ right rear power window motor (M10/6),
^ SR motor (M12m1),
in the "opening" direction until the position stored for the tilting/ sliding roof and the windows is reached, if the current window position is located at least 8 Hall pulses above the stored opening position or until the air recirculation switch (N22s2 or N22/7s2) is released.
